WTware v.5.0.1
WTware 5.0.1 supervisor.
WTC listener active.
WTC broadcast listener active.
HTTPd listener active.
[KERNEL] Linux version 3.0.0 (root@compiler) (gcc version 4.5.2 (Buildroot 2011.05-git) ) #1 PREEMPT Tue Aug 2 01:39:00 UTC 2011
[KERNEL] KERNEL supported cpus:
[KERNEL] Intel GenuineIntel
[KERNEL] AMD AuthenticAMD
[KERNEL] NSC Geode by NSC
[KERNEL] Cyrix CyrixInstead
[KERNEL] Centaur CentaurHauls
[KERNEL] Transmeta GenuineTMx86
[KERNEL] Transmeta TransmetaCPU
[KERNEL] UMC UMC UMC UMC
[KERNEL] BIOS-provided physical RAM map:
[KERNEL] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[KERNEL] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[KERNEL] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[KERNEL] BIOS-e820: 0000000000100000 - 000000001efb0000 (usable)
[KERNEL] BIOS-e820: 000000001efb0000 - 000000001efb3000 (ACPI NVS)
[KERNEL] BIOS-e820: 000000001efb3000 - 000000001efc0000 (ACPI data)
[KERNEL] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[KERNEL] Notice: NX (Execute Disable) protection missing in CPU!
[KERNEL] DMI 2.2 present.
[KERNEL] DMI: /AMD-GX3, BIOS 6.00 PG 04/22/2008
[KERNEL] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[KERNEL] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[KERNEL] last_pfn = 0x1efb0 max_arch_pfn = 0x100000
[KERNEL] initial memory mapped : 0 - 00800000
[KERNEL] Base memory trampoline at [c009a000] 9a000 size 12288
[KERNEL] init_memory_mapping: 0000000000000000-000000001efb0000
[KERNEL] 0000000000 - 0000400000 page 4k
[KERNEL] 0000400000 - 001ec00000 page 2M
[KERNEL] 001ec00000 - 001efb0000 page 4k
[KERNEL] kernel direct mapping tables up to 1efb0000 @ 7fb000-800000
[KERNEL] early_memtest: # of tests: 1
[KERNEL] 0000010000 - 000009a000 pattern 0000000000000000
[KERNEL] 000009d000 - 000009d800 pattern 0000000000000000
[KERNEL] 000041d06a - 00007fb000 pattern 0000000000000000
[KERNEL] 00007fc000 - 001ebba000 pattern 0000000000000000
[KERNEL] 001ef8f000 - 001efb0000 pattern 0000000000000000
[KERNEL] RAMDISK: 1ebba000 - 1ef8f000
[KERNEL] ACPI: RSDP 000f60d0 00014 (v00 AMDGX3)
[KERNEL] ACPI: RSDT 1efb3000 00028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[KERNEL] ACPI: FACP 1efb3080 00074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[KERNEL] ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 (20110413/tbfadt-610)
[KERNEL] ACPI: DSDT 1efb3100 02CBD (v01 AMDGX3 AWRDACPI 00001000 MSFT 03000000)
[KERNEL] ACPI: FACS 1efb0000 00040
[KERNEL] 495MB LOWMEM available.
[KERNEL] mapped low ram: 0 - 1efb0000
[KERNEL] low ram: 0 - 1efb0000
[KERNEL] Zone PFN ranges:
[KERNEL] DMA 0x00000010 -> 0x00001000
[KERNEL] Normal 0x00001000 -> 0x0001efb0
[KERNEL] Movable zone start PFN for each node
[KERNEL] early_node_map[2] active PFN ranges
[KERNEL] 0: 0x00000010 -> 0x0000009e
[KERNEL] 0: 0x00000100 -> 0x0001efb0
[KERNEL] On node 0 totalpages: 126782
[KERNEL] free_area_init_node: node 0, pgdat c03b0e60, node_mem_map de7da200
[KERNEL] DMA zone: 32 pages used for memmap
[KERNEL] DMA zone: 0 pages reserved
[KERNEL] DMA zone: 3950 pages, LIFO batch:0
[KERNEL] Normal zone: 960 pages used for memmap
[KERNEL] Normal zone: 121840 pages, LIFO batch:31
[KERNEL] Using APIC driver default
[KERNEL] ACPI: PM-Timer IO Port: 0x9c10
[KERNEL] No local APIC present or hardware disabled
[KERNEL] APIC: disable apic facility
[KERNEL] APIC: switched to apic NOOP
[KERNEL] nr_irqs_gsi: 16
[KERNEL] Allocating PCI resources starting at 1efc0000 (gap: 1efc0000:e1030000)
[KERNEL] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[KERNEL] pcpu-alloc: [0] 0 
[KERNEL] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125790
[KERNEL] Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=8192 memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel 
[KERNEL] PID hash table entries: 2048 (order: 1, 8192 bytes)
[KERNEL] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[KERNEL] Initializing CPU#0
[KERNEL] Memory: 495588k/507584k available (2179k kernel code, 11540k reserved, 586k data, 292k init, 0k highmem)
[KERNEL] virtual kernel memory layout:
[KERNEL] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[KERNEL] vmalloc : 0xdf7b0000 - 0xfffa0000 ( 519 MB)
[KERNEL] lowmem : 0xc0000000 - 0xdefb0000 ( 495 MB)
[KERNEL] .init : 0xc03b4000 - 0xc03fd000 ( 292 kB)
[KERNEL] .data : 0xc0320c9b - 0xc03b35c0 ( 586 kB)
[KERNEL] .text : 0xc0100000 - 0xc0320c9b (2179 kB)
[KERNEL] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[KERNEL] NR_IRQS:288
[KERNEL] CPU 0 irqstacks, hard=de006000 soft=de008000
[KERNEL] Console: colour VGA+ 80x25
[KERNEL] console [tty0] enabled
[KERNEL] Fast TSC calibration using PIT
[KERNEL] Detected 498.627 MHz processor.
[KERNEL] Calibrating delay loop (skipped), value calculated using timer frequency.. 997.25 BogoMIPS (lpj=498627)
[KERNEL] pid_max: default: 32768 minimum: 301
[KERNEL] Mount-cache hash table entries: 512
[KERNEL] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
[KERNEL] ACPI: Core revision 20110413
[KERNEL] ACPI: setting ELCR to 0200 (from 0c20)
[KERNEL] Performance Events: no PMU driver, software events only.
[KERNEL] NET: Registered protocol family 16
[KERNEL] ACPI: bus type pci registered
[KERNEL] PCI: PCI BIOS revision 2.10 entry at 0xfaad0, last bus=0
[KERNEL] PCI: Using configuration type 1 for base access
[KERNEL] bio: create slab at 0
[KERNEL] ACPI: EC: Look up EC in DSDT
[KERNEL] ACPI: Interpreter enabled
[KERNEL] ACPI: (supports S0 S1 S3 S5)
[KERNEL] ACPI: Using PIC for interrupt routing
[KERNEL] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[KERNEL] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xac17]
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0xac20-0xffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x1efc0000-0xfebfffff]
[KERNEL] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600
[KERNEL] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f]
[KERNEL] pci 0000:00:01.0: reg 14: [io 0x9e00-0x9e07]
[KERNEL] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300
[KERNEL] pci 0000:00:01.1: reg 10: [mem 0xec000000-0xedffffff]
[KERNEL] pci 0000:00:01.1: reg 14: [mem 0xefff0000-0xefff3fff]
[KERNEL] pci 0000:00:01.1: reg 18: [mem 0xeffec000-0xeffeffff]
[KERNEL] pci 0000:00:01.1: reg 1c: [mem 0xeffe8000-0xeffebfff]
[KERNEL] pci 0000:00:01.1: reg 20: [mem 0xefff8000-0xefffbfff]
[KERNEL] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010
[KERNEL] pci 0000:00:01.2: reg 10: [mem 0xefff4000-0xefff7fff]
[KERNEL] pci 0000:00:0d.0: [10ec:8139] type 0 class 0x000200
[KERNEL] pci 0000:00:0d.0: reg 10: [io 0xfc00-0xfcff]
[KERNEL] pci 0000:00:0d.0: reg 14: [mem 0xeffff000-0xeffff0ff]
[KERNEL] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[KERNEL] pci 0000:00:0d.0: supports D1 D2
[KERNEL] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
[KERNEL] pci 0000:00:0d.0: PME# disabled
[KERNEL] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601
[KERNEL] pci 0000:00:0f.0: reg 10: [io 0x6000-0x6007]
[KERNEL] pci 0000:00:0f.0: reg 14: [io 0x6100-0x61ff]
[KERNEL] pci 0000:00:0f.0: reg 18: [io 0x6200-0x623f]
[KERNEL] pci 0000:00:0f.0: reg 1c: [io 0x0000-0x001f]
[KERNEL] pci 0000:00:0f.0: reg 20: [io 0x9d00-0x9d7f]
[KERNEL] pci 0000:00:0f.0: reg 24: [io 0x9c00-0x9c3f]
[KERNEL] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101
[KERNEL] pci 0000:00:0f.2: reg 20: [io 0xff00-0xff0f]
[KERNEL] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401
[KERNEL] pci 0000:00:0f.3: reg 10: [io 0xfe00-0xfe7f]
[KERNEL] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03
[KERNEL] pci 0000:00:0f.4: reg 10: [mem 0xefffe000-0xefffefff]
[KERNEL] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:0f.4: PME# disabled
[KERNEL] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03
[KERNEL] pci 0000:00:0f.5: reg 10: [mem 0xefffd000-0xefffdfff]
[KERNEL] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:0f.5: PME# disabled
[KERNEL] pci_bus 0000:00: on NUMA node 0
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[KERNEL] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[KERNEL] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[KERNEL] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[KERNEL] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[KERNEL] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[KERNEL] vgaarb: loaded
[KERNEL] vgaarb: bridge control possible 0000:00:01.1
[KERNEL] usbcore: registered new interface driver usbfs
[KERNEL] usbcore: registered new interface driver hub
[KERNEL] usbcore: registered new device driver usb
[KERNEL] PCI: Using ACPI for IRQ routing
[KERNEL] PCI: pci_cache_line_size set to 32 bytes
[KERNEL] pci 0000:00:01.0: no compatible bridge window for [io 0xac1c-0xac1f]
[KERNEL] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[KERNEL] reserve RAM buffer: 000000001efb0000 - 000000001fffffff 
[KERNEL] Switching to clocksource pit
[KERNEL] pnp: PnP ACPI init
[KERNEL] ACPI: bus type pnp registered
[KERNEL] pnp 00:00: [mem 0x000f0000-0x000fffff]
[KERNEL] pnp 00:00: [mem 0x1efb0000-0x1efbffff]
[KERNEL] pnp 00:00: [mem 0xffff0000-0xffffffff]
[KERNEL] pnp 00:00: [mem 0x00000000-0x0009ffff]
[KERNEL] pnp 00:00: [mem 0x00100000-0x1efaffff]
[KERNEL] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[KERNEL] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[KERNEL] system 00:00: [mem 0x1efb0000-0x1efbffff] could not be reserved
[KERNEL] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[KERNEL] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[KERNEL] system 00:00: [mem 0x00100000-0x1efaffff] could not be reserved
[KERNEL] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[KERNEL] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[KERNEL] pnp 00:01: [bus 00-ff]
[KERNEL] pnp 00:01: [io 0x0cf8-0x0cff]
[KERNEL] pnp 00:01: [io 0x0000-0x0cf7 window]
[KERNEL] pnp 00:01: [io 0x0d00-0xac17 window]
[KERNEL] pnp 00:01: [io 0xac20-0xffff window]
[KERNEL] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[KERNEL] pnp 00:01: [mem 0x000c8000-0x000dffff window]
[KERNEL] pnp 00:01: [mem 0x1efc0000-0xfebfffff window]
[KERNEL] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[KERNEL] pnp 00:02: [io 0x0010-0x001f]
[KERNEL] pnp 00:02: [io 0x0022-0x002d]
[KERNEL] pnp 00:02: [io 0x0030-0x003f]
[KERNEL] pnp 00:02: [io 0x0044-0x005f]
[KERNEL] pnp 00:02: [io 0x0062-0x0063]
[KERNEL] pnp 00:02: [io 0x0065-0x006f]
[KERNEL] pnp 00:02: [io 0x0074-0x007f]
[KERNEL] pnp 00:02: [io 0x0091-0x0093]
[KERNEL] pnp 00:02: [io 0x00a2-0x00bf]
[KERNEL] pnp 00:02: [io 0x00e0-0x00ef]
[KERNEL] pnp 00:02: [io 0x0b78-0x0b7b]
[KERNEL] pnp 00:02: [io 0x0f78-0x0f7b]
[KERNEL] pnp 00:02: [io 0x0a78-0x0a7b]
[KERNEL] pnp 00:02: [io 0x0e78-0x0e7b]
[KERNEL] pnp 00:02: [io 0x0bbc-0x0bbf]
[KERNEL] pnp 00:02: [io 0x0fbc-0x0fbf]
[KERNEL] pnp 00:02: [io 0x04d0-0x04d1]
[KERNEL] pnp 00:02: disabling [io 0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io 0x0000-0x001f]
[KERNEL] system 00:02: [io 0x0b78-0x0b7b] has been reserved
[KERNEL] system 00:02: [io 0x0f78-0x0f7b] has been reserved
[KERNEL] system 00:02: [io 0x0a78-0x0a7b] has been reserved
[KERNEL] system 00:02: [io 0x0e78-0x0e7b] has been reserved
[KERNEL] system 00:02: [io 0x0bbc-0x0bbf] has been reserved
[KERNEL] system 00:02: [io 0x0fbc-0x0fbf] has been reserved
[KERNEL] system 00:02: [io 0x04d0-0x04d1] has been reserved
[KERNEL] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:03: [dma 4]
[KERNEL] pnp 00:03: [io 0x0000-0x000f]
[KERNEL] pnp 00:03: [io 0x0080-0x0090]
[KERNEL] pnp 00:03: [io 0x0094-0x009f]
[KERNEL] pnp 00:03: [io 0x00c0-0x00df]
[KERNEL] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[KERNEL] pnp 00:04: [io 0x0070-0x0073]
[KERNEL] pnp 00:04: [irq 8]
[KERNEL] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[KERNEL] pnp 00:05: [io 0x0061]
[KERNEL] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[KERNEL] pnp 00:06: [io 0x00f0-0x00ff]
[KERNEL] pnp 00:06: [irq 13]
[KERNEL] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[KERNEL] pnp 00:07: [io 0x03f8-0x03ff]
[KERNEL] pnp 00:07: [irq 4]
[KERNEL] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp: PnP ACPI: found 8 devices
[KERNEL] ACPI: ACPI bus type pnp unregistered
[KERNEL] Switching to clocksource acpi_pm
[KERNEL] PCI: max bus depth: 0 pci_try_num: 1
[KERNEL] pci 0000:00:0d.0: BAR 6: assigned [mem 0x1efc0000-0x1efcffff pref]
[KERNEL] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f]
[KERNEL] pci 0000:00:0f.0: BAR 3: set to [io 0x1000-0x101f] (PCI address [0x1000-0x101f])
[KERNEL] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[KERNEL] pci_bus 0000:00: resource 5 [io 0x0d00-0xac17]
[KERNEL] pci_bus 0000:00: resource 6 [io 0xac20-0xffff]
[KERNEL] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000dffff]
[KERNEL] pci_bus 0000:00: resource 9 [mem 0x1efc0000-0xfebfffff]
[KERNEL] NET: Registered protocol family 2
[KERNEL] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[KERNEL] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[KERNEL] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[KERNEL] TCP: Hash tables configured (established 16384 bind 16384)
[KERNEL] TCP reno registered
[KERNEL] UDP hash table entries: 256 (order: 0, 4096 bytes)
[KERNEL] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[KERNEL] NET: Registered protocol family 1
[KERNEL] pci 0000:00:01.1: Boot video device
[KERNEL] PCI: CLS 32 bytes, default 32
[KERNEL] Freeing initrd memory: 3924k freed
[KERNEL] ROMFS MTD (C) 2007 Red Hat, Inc.
[KERNEL] msgmni has been set to 975
[KERNEL] io scheduler noop registered
[KERNEL] io scheduler cfq registered (default)
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[KERNEL] ACPI: Power Button [PWRB]
[KERNEL] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[KERNEL] ACPI: Sleep Button [SLPB]
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[KERNEL] ACPI: Power Button [PWRF]
[KERNEL] ACPI: acpi_idle registered with cpuidle
[KERNEL] brd: module loaded
[KERNEL] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[KERNEL] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
[KERNEL] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
[KERNEL] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[KERNEL] PCI: setting IRQ 11 as level-triggered
[KERNEL] ehci_hcd 0000:00:0f.5: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[KERNEL] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[KERNEL] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file 'devices'
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[KERNEL] ehci_hcd 0000:00:0f.5: reset hcs_params 0x1414 dbg=0 cc=1 pcc=4 ordered ports=4
[KERNEL] ehci_hcd 0000:00:0f.5: reset hcc_params 5012 thresh 1 uframes 256/512/1024
[KERNEL] ehci_hcd 0000:00:0f.5: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[KERNEL] ehci_hcd 0000:00:0f.5: ...powerup ports...
[KERNEL] ehci_hcd 0000:00:0f.5: MWI active
[KERNEL] ehci_hcd 0000:00:0f.5: supports USB remote wakeup
[KERNEL] ehci_hcd 0000:00:0f.5: irq 11, io mem 0xefffd000
[KERNEL] ehci_hcd 0000:00:0f.5: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[KERNEL] ehci_hcd 0000:00:0f.5: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[KERNEL] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[KERNEL] usb usb1: default language 0x0409
[KERNEL] usb usb1: udev 1, busnum 1, minor = 0
[KERNEL] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb1: Product: EHCI Host Controller
[KERNEL] usb usb1: Manufacturer: Linux 3.0.0 ehci_hcd
[KERNEL] usb usb1: SerialNumber: 0000:00:0f.5
[KERNEL] usb usb1: usb_probe_device
[KERNEL] usb usb1: configuration #1 chosen from 1 choice
[KERNEL] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[KERNEL] hub 1-0:1.0: usb_probe_interface
[KERNEL] hub 1-0:1.0: usb_probe_interface - got id
[KERNEL] hub 1-0:1.0: USB hub found
[KERNEL] hub 1-0:1.0: 4 ports detected
[KERNEL] hub 1-0:1.0: standalone hub
[KERNEL] hub 1-0:1.0: individual port power switching
[KERNEL] hub 1-0:1.0: individual port over-current protection
[KERNEL] hub 1-0:1.0: power on to power good time: 20ms
[KERNEL] hub 1-0:1.0: local power source is good
[KERNEL] hub 1-0:1.0: enabling power on all ports
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[KERNEL] ohci_hcd: block sizes: ed 64 td 64
[KERNEL] ohci_hcd 0000:00:0f.4: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[KERNEL] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[KERNEL] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '002'
[KERNEL] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[KERNEL] ohci_hcd 0000:00:0f.4: created debug files
[KERNEL] ohci_hcd 0000:00:0f.4: supports USB remote wakeup
[KERNEL] ohci_hcd 0000:00:0f.4: irq 11, io mem 0xefffe000
[KERNEL] ohci_hcd 0000:00:0f.4: OHCI controller state
[KERNEL] ohci_hcd 0000:00:0f.4: OHCI 1.0, NO legacy support registers
[KERNEL] ohci_hcd 0000:00:0f.4: control 0x283 RWC HCFS=operational CBSR=3
[KERNEL] ohci_hcd 0000:00:0f.4: cmdstatus 0x00000 SOC=0
[KERNEL] ohci_hcd 0000:00:0f.4: intrstatus 0x00000004 SF
[KERNEL] ohci_hcd 0000:00:0f.4: intrenable 0x8000005a MIE RHSC UE RD WDH
[KERNEL] ohci_hcd 0000:00:0f.4: hcca frame #0007
[KERNEL] ohci_hcd 0000:00:0f.4: roothub.a 03000204 POTPGT=3 NPS NDP=4(4)
[KERNEL] ohci_hcd 0000:00:0f.4: roothub.b 00000000 PPCM=0000 DR=0000
[KERNEL] ohci_hcd 0000:00:0f.4: roothub.status 00008000 DRWE
[KERNEL] ohci_hcd 0000:00:0f.4: roothub.portstatus [0] 0x00010100 CSC PPS
[KERNEL] ohci_hcd 0000:00:0f.4: roothub.portstatus [1] 0x00010100 CSC PPS
[KERNEL] ohci_hcd 0000:00:0f.4: roothub.portstatus [2] 0x00000100 PPS
[KERNEL] ohci_hcd 0000:00:0f.4: roothub.portstatus [3] 0x00000100 PPS
[KERNEL] usb usb2: default language 0x0409
[KERNEL] usb usb2: udev 1, busnum 2, minor = 128
[KERNEL] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb2: Product: OHCI Host Controller
[KERNEL] usb usb2: Manufacturer: Linux 3.0.0 ohci_hcd
[KERNEL] usb usb2: SerialNumber: 0000:00:0f.4
[KERNEL] usb usb2: usb_probe_device
[KERNEL] usb usb2: configuration #1 chosen from 1 choice
[KERNEL] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[KERNEL] hub 2-0:1.0: usb_probe_interface
[KERNEL] hub 2-0:1.0: usb_probe_interface - got id
[KERNEL] hub 2-0:1.0: USB hub found
[KERNEL] hub 2-0:1.0: 4 ports detected
[KERNEL] hub 2-0:1.0: standalone hub
[KERNEL] hub 2-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 2-0:1.0: global over-current protection
[KERNEL] hub 2-0:1.0: power on to power good time: 6ms
[KERNEL] hub 2-0:1.0: local power source is good
[KERNEL] hub 2-0:1.0: no over-current condition exists
[KERNEL] hub 2-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:0f.5: HS companion for 0000:00:0f.4
[KERNEL] uhci_hcd: USB Universal Host Controller Interface driver
[KERNEL] i8042: PNP: No PS/2 controller found. Probing ports directly.
[KERNEL] serio: i8042 KBD port at 0x60,0x64 irq 1
[KERNEL] serio: i8042 AUX port at 0x60,0x64 irq 12
[KERNEL] mousedev: PS/2 mouse device common for all mice
[KERNEL] input: PC Speaker as /devices/platform/pcspkr/input/input3
[KERNEL] cpuidle: using governor ladder
[KERNEL] usbcore: registered new interface driver usbhid
[KERNEL] usbhid: USB HID core driver
[KERNEL] TCP cubic registered
[KERNEL] NET: Registered protocol family 17
[KERNEL] Using IPI Shortcut mode
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
[KERNEL] hub 1-0:1.0: port 1: status 0501 change 0001
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT
[KERNEL] hub 1-0:1.0: port 2: status 0501 change 0001
[KERNEL] ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [0] = 0x00010100 CSC PPS
[KERNEL] ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS
[KERNEL] hub 1-0:1.0: state 7 ports 4 chg 0006 evt 0000
[KERNEL] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[KERNEL] ehci_hcd 0000:00:0f.5: port 1 low speed --> companion
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
[KERNEL] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[KERNEL] ehci_hcd 0000:00:0f.5: port 2 low speed --> companion
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
[KERNEL] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
[KERNEL] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0006
[KERNEL] ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
[KERNEL] hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[KERNEL] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[KERNEL] ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
[KERNEL] RAMDISK: lzo image found at block 0
[KERNEL] usb 2-1: new low speed USB device number 2 using ohci_hcd
[KERNEL] ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
[KERNEL] usb 2-1: skipped 1 descriptor after interface
[KERNEL] usb 2-1: default language 0x0409
[KERNEL] usb 2-1: udev 2, busnum 2, minor = 129
[KERNEL] usb 2-1: New USB device found, idVendor=046d, idProduct=c05b
[KERNEL] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] usb 2-1: Product: USB Optical Mouse
[KERNEL] usb 2-1: Manufacturer: Logitech
[KERNEL] usb 2-1: usb_probe_device
[KERNEL] usb 2-1: configuration #1 chosen from 1 choice
[KERNEL] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[KERNEL] usbhid 2-1:1.0: usb_probe_interface
[KERNEL] usbhid 2-1:1.0: usb_probe_interface - got id
[KERNEL] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0f.4/usb2/2-1/2-1:1.0/input/input4
[KERNEL] generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0f.4-1/input0
[KERNEL] drivers/usb/core/inode.c: creating file '002'
[KERNEL] ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[KERNEL] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[KERNEL] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[KERNEL] ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[KERNEL] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[KERNEL] Freeing unused kernel memory: 292k freed
[KERNEL] usb 2-2: new low speed USB device number 3 using ohci_hcd
[KERNEL] Refined TSC clocksource calibration: 498.619 MHz.
[KERNEL] Switching to clocksource tsc
[KERNEL] ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[KERNEL] usb 2-2: skipped 1 descriptor after interface
[KERNEL] usb 2-2: skipped 1 descriptor after interface
[KERNEL] usb 2-2: default language 0x0409
[KERNEL] usb 2-2: udev 3, busnum 2, minor = 130
[KERNEL] usb 2-2: New USB device found, idVendor=046d, idProduct=c31c
[KERNEL] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] usb 2-2: Product: USB Keyboard
[KERNEL] usb 2-2: Manufacturer: Logitech
[KERNEL] usb 2-2: usb_probe_device
[KERNEL] usb 2-2: configuration #1 chosen from 1 choice
[KERNEL] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[KERNEL] usbhid 2-2:1.0: usb_probe_interface
[KERNEL] usbhid 2-2:1.0: usb_probe_interface - got id
[KERNEL] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:0f.4/usb2/2-2/2-2:1.0/input/input5
[KERNEL] generic-usb 0003:046D:C31C.0002: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:0f.4-2/input0
[KERNEL] usb 2-2: adding 2-2:1.1 (config #1, interface 1)
[KERNEL] usbhid 2-2:1.1: usb_probe_interface
[KERNEL] usbhid 2-2:1.1: usb_probe_interface - got id
[KERNEL] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:0f.4/usb2/2-2/2-2:1.1/input/input6
[KERNEL] generic-usb 0003:046D:C31C.0003: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:0f.4-2/input1
[KERNEL] drivers/usb/core/inode.c: creating file '003'
[KERNEL] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
[pfac] Ok, PID 370.
[initrd] WTware shell v.5.0.1
[initrd] PCIID: 1022:2080 class 00 subclass 00.
[initrd] PCIID: 1022:2081 class 00 subclass 00.
[initrd] PCIID: 1022:2082 class 10 subclass 00.
[initrd] PCIID: 10ec:8139 class 00 subclass 00.
[initrd] PCIID: 1022:2090 class 01 subclass 00.
[initrd] PCIID: 1022:209a class 01 subclass 80.
[initrd] PCIID: 1022:2093 class 01 subclass 00.
[initrd] PCIID: 1022:2094 class 03 subclass 10.
[initrd] PCIID: 1022:2095 class 03 subclass 20.
[initrd] PCIID, VGA: 1022:2094.
[initrd] PCIID, second VGA: 1022:2095.
/--- FILE "/proc/bus/usb/devices" -----------------------
| T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
| B: Alloc= 16/900 us ( 2%), #Int= 2, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 ohci_hcd
| S: Product=OHCI Host Controller
| S: SerialNumber=0000:00:0f.4
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
| D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| P: Vendor=046d ProdID=c05b Rev=54.00
| S: Manufacturer=Logitech
| S: Product=USB Optical Mouse
| C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
| E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=10ms
| T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
| D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| P: Vendor=046d ProdID=c31c Rev=64.00
| S: Manufacturer=Logitech
| S: Product=USB Keyboard
| C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 90mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
| E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
| I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
| E: Ad=82(I) Atr=03(Int.) MxPS= 4 Ivl=255ms
| T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
| B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0002 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 ehci_hcd
| S: Product=EHCI Host Controller
| S: SerialNumber=0000:00:0f.5
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
\----------------------------------------------------
[initrd] Loading ethernet drivers.
[initrd] +--- Executing "/sbin/modprobe 8139too"
[KERNEL] 8139too: 8139too Fast Ethernet driver 0.9.28
[KERNEL] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[KERNEL] 8139too 0000:00:0d.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[KERNEL] 8139too 0000:00:0d.0: eth0: RealTek RTL8139 at 0xdf802000, 14:14:4b:1d:c9:c2, IRQ 11
[initrd] +- Errorlevel: 0, output:
[initrd] +------------------------
[initrd] NIC module 8139too.ko loaded.
[initrd] +--- Executing "/sbin/modprobe 8139cp"
[KERNEL] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[initrd] +- Errorlevel: 0, output:
[initrd] +------------------------
[initrd] NIC module 8139cp.ko loaded.
[KERNEL] 8139too 0000:00:0d.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[initrd] dhcp: 367 bytes from 192.168.100.245.
[initrd] 00000000:0000015b0000000000110000c0a864f5ffffffff00430044015b000002010600
[initrd] 00000020:67458b6b0000000000000000c0a864e9c0a864f50000000014144b1dc9c20000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e302e315c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501020104ffffff003a041ffffffe3b041fffff
[initrd] 00000120:ff3304ffffffff3604c0a864f50304c0a864050608c0a86437c0a864110f0a68
[initrd] 00000140:6f7573652e696e740042103139322e3136382e3130302e323435004311352e30
[initrd] 00000160:2e315c7774776172652e70786500ff
[initrd] dhcp: 367 bytes from 192.168.100.245.
[initrd] 00000000:0000015b0000000000110000c0a864f5ffffffff00430044015b000002010600
[initrd] 00000020:67458b6b0000000000000000c0a864e9c0a864f50000000014144b1dc9c20000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e302e315c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501053a041ffffffe3b041fffffff3304ffffff
[initrd] 00000120:ff3604c0a864f50104ffffff000304c0a864050608c0a86437c0a864110f0a68
[initrd] 00000140:6f7573652e696e740042103139322e3136382e3130302e323435004311352e30
[initrd] 00000160:2e315c7774776172652e70786500ff
[initrd] dhcp: server address 192.168.100.245.
[initrd] dhcp: 192.168.100.233/255.255.255.0.
[initrd] dhcp: default gateway 192.168.100.5.
[initrd] dhcp: DNS 192.168.100.55.
[initrd] dhcp: DNS 192.168.100.17.
[initrd] dhcp: domain house.int.
[initrd] dhcp: TFTP 192.168.100.245.
[initrd] dhcp: boot file (067) 5.0.1\wtware.pxe.
[initrd] TFTP binary "5.0.1\", configs prefix "", using "\" slash.
Send broadcast WTCU discover.
[initrd] WTware TFTP v.5.0.1.
[initrd] tftp: download file Everyone\list.wtc from 192.168.100.245.
/--- FILE "/tmp/list.wtc" -----------------------
| #
| # Nienie iiaee??aaiuo oaeeia.
| #
| # Yoio ioaaeuiue iaoaieci iano?ieee oa?ieiaeia i?aaiacia?ai oieuei
| # aey ?o?iiai eiioeao?e?iaaiey oa?ieiaeia. A?aoe?aneee eiioeao?aoi?
| # ia ?eoaao list.wtc, ia ?eoaao e ia iicaieyao ?aaaeoe?iaaou oaeeu
| # ec eaoaeiaa ListIncludes. Iiyoiio iaeucy iuoaouny iano?aeaaou iaei
| # e oio ?a oa?ieiae e eiioeao?aoi?ii, e ?a?ac list.wtc.
| #
| # Oi?iao no?iee a yoii oaeea:
| # 
| # 01.02.03.04.05.06[([eiyiieuciaaoaey@][eiyoa?ieiaea])] [oaee [oaee ...]]] [# eiiiaioa?ee]
| #
| # I?eia?u:
| #
| # 02.03.04.05.06.07 file1
| #
| # Icia?aao, ?oi oa?ieiae n iae-aa?anii 02.03.04.05.06.07 i?i?eoaao
| # ia?aiao?u ec oaeea ListIncludes/file1.
| #
| #
| # 03.04.05.06.07.08(vasja@) file2
| #
| # Icia?aao, ?oi oa?ieiae n iae-aa?anii 03.04.05.06.07.08 i?i?eoaao
| # ia?aiao?u ec oaeea ListIncludes/file2 e a ieioei "Aoia a Windows"
| # iianoaaeo eiy iieuciaaoaey "vasja".
| #
| #
| # 04.05.06.07.08.09(term5) file6 file7 # Eiii caiaeaaaooa.
| #
| # Icia?aao, ?oi oa?ieiaeo n iae-aa?anii 04.05.06.07.08.09 aoaao
| # i?enaiaii eiy term5, aiaeiae?ii oeacaie? ia?aiao?a clienthostname,
| # e ii i?i?eoaao ia?aiao?u ec oaeeia ListIncludes/file6 e
| # ListIncludes/file7.
| #
| #
| # ?oiau ii?ii auei oeacuaaou eiy iieuciaaoaey ?onneeie aoeaaie, iaai
| # ioe?uou yoio oaee a Notepad e nio?aieou n Encoding: Unicode.
| #
\----------------------------------------------------
[initrd] tftp: download file Terminals\14.14.4B.1D.C9.C2\config.wtc from 192.168.100.245.
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| server=fr-ts-farm.house.int
| domain=house
| keyboard=en
| numlock=on
| smartcard=on
| clienthostname=maksimkina
| user=maksimkina
| turnoffmenu=on
| managed=on
| mouse=auto
| resolution=1440x900
| video=geode(X)
| bpp=16
| refresh=75
| ask_password=on
| disk=usb
| noddc=on
| connection 
\----------------------------------------------------
[initrd] tftp: download file Everyone\all.wtc from 192.168.100.245.
/--- FILE "/tmp/all.wtc" -----------------------
| server=192.168.77.101
\----------------------------------------------------
[initrd] tftp: download file Everyone\wtware.lic from 192.168.100.245.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=fr-ts-farm.house.int
| domain=house
| keyboard=en
| numlock=on
| smartcard=on
| clienthostname=maksimkina
| user=maksimkina
| turnoffmenu=on
| managed=on
| mouse=auto
| resolution=1440x900
| video=geode(X)
| bpp=16
| refresh=75
| ask_password=on
| disk=usb
| noddc=on
| connection 
\----------------------------------------------------
[initrd] Hostname: "maksimkina".
RSHd listener active.
Everyone can control terminal by http.
[initrd] tftp: download and unpack file 5.0.1\packages\x from 192.168.100.245.
[initrd] tftp: download and unpack file 5.0.1\packages\xgeode from 192.168.100.245.
[initrd] tftp: download and unpack file 5.0.1\packages\graphic from 192.168.100.245.
[gm] WTware session manager v.5.0.1.
[gm] New mode: 1440x900, 16 bit, 75 Hz, modeline "", DDC disabled, connector 0.
[gm] Mouse PnP: IMPS2 or EXPPS2?
[gm] Mouse PnP: EXPPS2.
[gm] Find mode 1440x900@75Hz in table.
/--- FILE "/etc/XF86Config" -----------------------
| Section "Files"
| FontPath "/X11R7/fonts"
| EndSection
| Section "ServerFlags"
| Option "DontVTSwitch"
| Option "DontZoom"
| Option "DontZap"
| Option "NoPM"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard1"
| Driver "void"
| Option "XkbDisable"
| EndSection
| Section "InputDevice"
| Identifier "Mouse1"
| Driver "void"
| EndSection
| Section "Device"
| Identifier "Video"
| Driver "geode"
| Option "NoAccel" "on"
| Option "MergedFB" "off"
| Option "ShadowFB" "off"
| Option "NoDDC" "on"
| Option "DRI" "off"
| EndSection
| Section "Monitor"
| Identifier "Monitor"
| HorizSync 20-200
| VertRefresh 50-80
| ModeLine "1440x900" 136.75 1440 1536 1688 1936 900 903 909 942 -HSync +VSync
| Option "PreferredMode" "1440x900"
| EndSection
| Section "Screen"
| Identifier "Screen"
| Device "Video"
| Monitor "Monitor"
| DefaultDepth 16
| SubSection "Display"
| Depth 16
| Modes "1440x900"
| Virtual 1440 900
| EndSubSection
| EndSection
| Section "ServerLayout"
| Identifier "Layout"
| Screen "Screen"
| InputDevice "Keyboard1" "CoreKeyboard"
| InputDevice "Mouse1" "CorePointer"
| EndSection
\----------------------------------------------------
[pfac] Got command line /X11R7/bin/Xorg -br -bs -s 0 .
[pfac] Ok, PID 387.
[X.org log] (WW) Failed to open protocol names file /X11R7/lib/xorg/protocol.txt
[X.org out] X.Org X Server 1.15.3
[X.org out] Release Date: 5 November 2008
[X.org log] X.Org X Server 1.15.3
[X.org log] Release Date: 5 November 2008
[X.org out] X Protocol Version 11, Revision 0
[X.org log] X Protocol Version 11, Revision 0
[X.org out] Build Operating System: Linux 
[X.org log] Build Operating System: Linux 
[X.org out] Current Operating System: Linux (none) 3.0.0 #1 PREEMPT Tue Aug 2 01:39:00 UTC 2011 i586
[X.org log] Current Operating System: Linux (none) 3.0.0 #1 PREEMPT Tue Aug 2 01:39:00 UTC 2011 i586
[X.org out] Build Date: 27 May 2011 01:40:12PM
[X.org log] Build Date: 27 May 2011 01:40:12PM
[X.org out] 
[X.org log] 
[X.org out] Before reporting problems, check http://www.wtware.com/
[X.org out] to make sure that you have the latest version.
[X.org log] Before reporting problems, check http://www.wtware.com/
[X.org log] to make sure that you have the latest version.
[X.org out] Markers: (--) probed, (**) from config file, (==) default setting,
[X.org log] Markers: (--) probed, (**) from config file, (==) default setting,
[X.org out] (++) from command line, (!!) notice, (II) informational,
[X.org log] (++) from command line, (!!) notice, (II) informational,
[X.org out] (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[X.org log] (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[X.org out] (==) Log file: "/X11R7/var/log/Xorg.0.log", Time: Mon Sep 24 07:43:43 2012
[X.org log] (==) Log file: "/X11R7/var/log/Xorg.0.log", Time: Mon Sep 24 07:43:43 2012
[X.org out] (==) Using config file: "/etc/XF86Config"
[X.org log] (==) Using config file: "/etc/XF86Config"
[X.org log] (==) ServerLayout "Layout"
[X.org log] (**) |-->Screen "Screen" (0)
[X.org log] (**) | |-->Monitor "Monitor"
[X.org log] (**) | |-->Device "Video"
[X.org log] (**) |-->Input Device "Keyboard1"
[X.org log] (**) |-->Input Device "Mouse1"
[X.org log] (**) Option "DontVTSwitch"
[X.org log] (**) Option "DontZap"
[X.org log] (**) Option "DontZoom"
[X.org log] (**) Option "NoPM"
[X.org log] (==) Automatically adding devices
[X.org log] (==) Automatically enabling devices
[X.org log] (WW) The directory "/X11R7/fonts" does not exist.
[X.org log] Entry deleted from font path.
[X.org log] (WW) FontPath is completely invalid. Using compiled-in default.
[X.org log] (==) FontPath set to:
[X.org log] built-ins
[X.org log] (==) ModulePath set to "/X11R7/lib/xorg/modules"
[X.org log] (II) Loader magic: 0x81ad87c
[X.org log] (II) Module ABI versions:
[X.org log] X.Org ANSI C Emulation: 0.4
[X.org log] X.Org Video Driver: 4.1
[X.org log] X.Org XInput driver : 2.1
[X.org log] X.Org Server Extension : 1.1
[X.org log] X.Org Font Renderer : 0.6
[X.org log] (II) Loader running on linux
[X.org log] (--) PCI:*(0@0:1:1) unknown vendor (0x1022) unknown chipset (0x2081) rev 0, Mem @ 0xec000000/0, 0xefff0000/0, 0xeffec000/0, 0xeffe8000/0, 0xefff8000/0
[X.org log] (II) System resource ranges:
[X.org log] [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[X.org log] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[X.org log] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[X.org log] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[X.org log] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[X.org log] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[X.org log] (II) LoadModule: "extmod"
[X.org log] (II) Loading /X11R7/lib/xorg/modules/extensions//libextmod.so
[X.org log] (II) Module extmod: vendor="X.Org Foundation"
[X.org log] compiled for 1.15.3, module version = 1.0.0
[X.org log] Module class: X.Org Server Extension
[X.org log] ABI class: X.Org Server Extension, version 1.1
[X.org log] (II) Loading extension SHAPE
[X.org log] (II) Loading extension MIT-SUNDRY-NONSTANDARD
[X.org log] (II) Loading extension BIG-REQUESTS
[X.org log] (II) Loading extension SYNC
[X.org log] (II) Loading extension XC-MISC
[X.org log] (II) Loading extension XVideo
[X.org log] (II) Loading extension XVideo-MotionCompensation
[X.org log] (II) LoadModule: "dbe"
[X.org log] (WW) Warning, couldn't open module dbe
[X.org log] (II) UnloadModule: "dbe"
[X.org out] (EE) Failed to load module "dbe" (module does not exist, 0)
[X.org log] (EE) Failed to load module "dbe" (module does not exist, 0)
[X.org log] (II) LoadModule: "glx"
[X.org log] (WW) Warning, couldn't open module glx
[X.org log] (II) UnloadModule: "glx"
[X.org out] (EE) Failed to load module "glx" (module does not exist, 0)
[X.org log] (EE) Failed to load module "glx" (module does not exist, 0)
[X.org log] (II) LoadModule: "freetype"
[X.org log] (WW) Warning, couldn't open module freetype
[X.org log] (II) UnloadModule: "freetype"
[X.org out] (EE) Failed to load module "freetype" (module does not exist, 0)
[X.org log] (EE) Failed to load module "freetype" (module does not exist, 0)
[X.org log] (II) LoadModule: "dri"
[X.org log] (WW) Warning, couldn't open module dri
[X.org log] (II) UnloadModule: "dri"
[X.org out] (EE) Failed to load module "dri" (module does not exist, 0)
[X.org log] (EE) Failed to load module "dri" (module does not exist, 0)
[X.org log] (II) LoadModule: "geode"
[X.org log] (II) Loading /X11R7/lib/xorg/modules/drivers//geode_drv.so
[X.org log] (II) Module geode: vendor="X.Org Foundation"
[X.org log] compiled for 1.15.3, module version = 2.211.12
[X.org log] Module class: X.Org Video Driver
[X.org log] ABI class: X.Org Video Driver, version 4.1
[X.org log] (II) LoadModule: "void"
[X.org log] (II) Loading /X11R7/lib/xorg/modules/input//void_drv.so
[X.org log] (II) Module void: vendor="X.Org Foundation"
[X.org log] compiled for 1.15.3, module version = 1.13.0
[X.org log] Module class: X.Org XInput Driver
[X.org log] ABI class: X.Org XInput driver, version 2.1
[X.org log] (II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
[X.org log] (II) Primary Device is: PCI 00@00:01:1
[X.org out] AmdPciProbe: Probing for supported devices!
[X.org log] AmdPciProbe: Probing for supported devices!
[X.org log] (II) resource ranges after xf86ClaimFixedResources() call:
[X.org log] [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[X.org log] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[X.org log] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[X.org log] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[X.org log] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[X.org log] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[X.org log] (II) resource ranges after probing:
[X.org log] [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[X.org log] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[X.org log] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[X.org log] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[X.org log] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[X.org log] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[X.org log] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[X.org log] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[X.org log] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[X.org log] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[X.org log] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
[X.org log] (WW) System lacks support for changing MTRRs
[X.org out] Unable to open /dev/cpu/0/msr: 2
[X.org log] Unable to open /dev/cpu/0/msr: 2
[X.org log] (**) GEODE(0): Depth 16, (--) framebuffer bpp 16
[X.org log] (==) GEODE(0): RGB weight 565
[X.org log] (==) GEODE(0): Default visual is TrueColor
[X.org log] (==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
[X.org log] (**) GEODE(0): Option "NoAccel" "on"
[X.org log] (==) GEODE(0): No DCON is present
[X.org log] (II) GEODE(0): LX output options:
[X.org log] (II) GEODE(0): CRT: YES
[X.org log] (II) GEODE(0): PANEL: NO
[X.org log] (II) GEODE(0): DCON: NO
[X.org log] (II) GEODE(0): VGA: NO
[X.org log] (II) GEODE(0): 1000000 bytes of video memory is less then optimal
[X.org log] (II) GEODE(0): when compression is on. Disabling compression.
[X.org log] (II) GEODE(0): Output default using monitor section Monitor
[X.org log] (**) GEODE(0): Option "PreferredMode" "1440x900"
[X.org log] (II) GEODE(0): I2C bus "CS5536 DDC" initialized.
[X.org log] (**) GEODE(0): Option "NoDDC" "on"
[X.org log] (II) GEODE(0): Output default connected
[X.org log] (II) GEODE(0): Using user preference for initial modes
[X.org log] (II) GEODE(0): Output default using initial mode 1440x900
[X.org log] (--) GEODE(0): Virtual size is 1440x900 (pitch 0)
[X.org log] (**) GEODE(0): Mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[X.org log] (II) GEODE(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[X.org log] (**) GEODE(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[X.org log] (II) GEODE(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[X.org log] (**) GEODE(0): Default mode "1024x768": 170.2 MHz (scaled from 0.0 MHz), 120.2 kHz, 75.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz)
[X.org log] (**) GEODE(0): Default mode "1024x768": 133.5 MHz (scaled from 0.0 MHz), 95.3 kHz, 60.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz)
[X.org log] (**) GEODE(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[X.org log] (II) GEODE(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[X.org log] (**) GEODE(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[X.org log] (II) GEODE(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[X.org log] (**) GEODE(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[X.org log] (II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[X.org log] (**) GEODE(0): Default mode "960x720": 148.5 MHz (scaled from 0.0 MHz), 112.5 kHz, 75.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz)
[X.org log] (**) GEODE(0): Default mode "960x720": 117.0 MHz (scaled from 0.0 MHz), 90.0 kHz, 60.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz)
[X.org log] (**) GEODE(0): Default mode "928x696": 144.0 MHz (scaled from 0.0 MHz), 112.5 kHz, 75.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz)
[X.org log] (**) GEODE(0): Default mode "928x696": 109.2 MHz (scaled from 0.0 MHz), 86.4 kHz, 60.1 Hz (D)
[X.org log] (II) GEODE(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz)
[X.org log] (**) GEODE(0): Default mode "896x672": 130.5 MHz (scaled from 0.0 MHz), 106.3 kHz, 75.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz)
[X.org log] (**) GEODE(0): Default mode "896x672": 102.4 MHz (scaled from 0.0 MHz), 83.7 kHz, 60.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz)
[X.org log] (**) GEODE(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[X.org log] (II) GEODE(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[X.org log] (**) GEODE(0): Default mode "800x600": 101.3 MHz (scaled from 0.0 MHz), 93.8 kHz, 75.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz)
[X.org log] (**) GEODE(0): Default mode "800x600": 94.5 MHz (scaled from 0.0 MHz), 87.5 kHz, 70.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz)
[X.org log] (**) GEODE(0): Default mode "800x600": 87.8 MHz (scaled from 0.0 MHz), 81.3 kHz, 65.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.3 kHz)
[X.org log] (**) GEODE(0): Default mode "800x600": 81.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz)
[X.org log] (**) GEODE(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[X.org log] (II) GEODE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[X.org log] (**) GEODE(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[X.org log] (II) GEODE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[X.org log] (**) GEODE(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[X.org log] (II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[X.org log] (**) GEODE(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.3 Hz
[X.org log] (II) GEODE(0): Modeline "800x600"x56.3 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[X.org log] (**) GEODE(0): Default mode "700x525": 77.9 MHz (scaled from 0.0 MHz), 81.5 kHz, 74.8 Hz (D)
[X.org log] (II) GEODE(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz)
[X.org log] (**) GEODE(0): Default mode "700x525": 61.0 MHz (scaled from 0.0 MHz), 64.9 kHz, 60.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz)
[X.org log] (**) GEODE(0): Default mode "640x512": 67.5 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz)
[X.org log] (**) GEODE(0): Default mode "640x512": 54.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz)
[X.org log] (**) GEODE(0): Default mode "640x480": 54.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
[X.org log] (**) GEODE(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[X.org log] (II) GEODE(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[X.org log] (**) GEODE(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[X.org log] (II) GEODE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[X.org log] (**) GEODE(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[X.org log] (II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[X.org log] (**) GEODE(0): Default mode "576x432": 54.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz)
[X.org log] (**) GEODE(0): Default mode "512x384": 39.4 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
[X.org log] (**) GEODE(0): Default mode "512x384": 37.5 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz (D)
[X.org log] (II) GEODE(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
[X.org log] (**) GEODE(0): Default mode "512x384": 32.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
[X.org log] (**) GEODE(0): Default mode "416x312": 28.6 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.7 Hz (D)
[X.org log] (II) GEODE(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
[X.org log] (**) GEODE(0): Default mode "400x300": 25.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (D)
[X.org log] (II) GEODE(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
[X.org log] (**) GEODE(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.1 Hz (D)
[X.org log] (II) GEODE(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
[X.org log] (**) GEODE(0): Default mode "400x300": 20.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz (D)
[X.org log] (II) GEODE(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
[X.org log] (**) GEODE(0): Default mode "400x300": 18.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.3 Hz (D)
[X.org log] (II) GEODE(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
[X.org log] (**) GEODE(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz (D)
[X.org log] (II) GEODE(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz)
[X.org log] (**) GEODE(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz (D)
[X.org log] (II) GEODE(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
[X.org log] (**) GEODE(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.1 Hz (D)
[X.org log] (II) GEODE(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
[X.org log] (==) GEODE(0): DPI set to (96, 96)
[X.org log] (II) Loading sub module "fb"
[X.org log] (II) LoadModule: "fb"
[X.org log] (II) Loading /X11R7/lib/xorg/modules//libfb.so
[X.org log] (II) Module fb: vendor="X.Org Foundation"
[X.org log] compiled for 1.15.3, module version = 1.0.0
[X.org log] ABI class: X.Org ANSI C Emulation, version 0.4
[X.org log] (II) do I need RAC? No, I don't.
[X.org log] (II) resource ranges after preInit:
[X.org log] [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[X.org log] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[X.org log] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[X.org log] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[X.org log] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[X.org log] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[X.org log] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[X.org log] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[X.org log] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[X.org log] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[X.org log] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
[X.org log] (II) GEODE(0): Geode LX video memory e00000 bytes at 0xb6742000
[X.org log] (II) GEODE(0): LX video memory:
[X.org log] (II) GEODE(0): Display: 0x3f4800 bytes
[X.org log] (II) GEODE(0): Cursor: 0x3000 bytes
[X.org log] (II) GEODE(0): ExaBfrSz: 0x40000 bytes
[X.org log] (II) GEODE(0): FREE: 0x908800 bytes
[X.org log] (++) GEODE(0): Backing store disabled
[X.org out] Cannot run Xv without accelerations!
[X.org log] Cannot run Xv without accelerations!
[X.org log] (II) GEODE(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[X.org log] (WW) GEODE(0): Option "MergedFB" is not used
[X.org log] (WW) GEODE(0): Option "ShadowFB" is not used
[X.org log] (WW) GEODE(0): Option "DRI" is not used
[X.org log] (WW) GEODE(0): Option "PreferredMode" is not used
[X.org log] (--) RandR disabled
[X.org log] (II) Initializing built-in extension MIT-SHM
[X.org log] (II) Initializing built-in extension XInputExtension
[X.org log] (II) Initializing built-in extension XTEST
[X.org log] (II) Initializing built-in extension XFIXES
[X.org log] (II) Initializing built-in extension RENDER
[X.org log] (II) Initializing built-in extension RANDR
[X.org log] (II) Initializing built-in extension DAMAGE
[X.org log] (II) GEODE(0): Setting screen physical size to 380 x 238
[X.org log] (**) Option "CoreKeyboard"
[X.org log] (**) Keyboard1: always reports core events
[X.org log] (**) Option "CorePointer"
[X.org log] (**) Mouse1: always reports core events
[X.org log] (II) evaluating device (Keyboard1)
[X.org log] (II) XINPUT: Adding extended input device "Keyboard1" (type: Void)
[X.org log] (II) evaluating device (Mouse1)
[X.org log] (II) XINPUT: Adding extended input device "Mouse1" (type: Void)
[gm] Allocate 2592000 bytes of shared memory for X imgbuf.
[gm] New shared memory block 1440x900@16bit: id 0x00000000, address 0xb7462000.
[X.org log] (II) libc: 13398 usec.
[X.org log] (II) built-in-1: 12861 usec.
[X.org log] (II) built-in-2: 24336 usec.
[X.org log] (II) MMX: 11624 usec.
[X.org log] (II) 3DNow!: 8542 usec.
[X.org log] (II) MMX2: 8633 usec.
[X.org log] (II) 3DNow! is fastest.
[gm] Release shared memory block: id 0x00000000, address 0xb7462000.
[gm] Allocate 8192 bytes of shared memory for X imgbuf.
[gm] New shared memory block 64x64@16bit: id 0x00008001, address 0xb76cc000.
[gm] Allocate 40960 bytes of shared memory for X imgbuf.
[gm] New shared memory block 320x64@16bit: id 0x00010000, address 0xb76c2000.
[gm] Allocate 2592000 bytes of shared memory for X imgbuf.
[gm] New shared memory block 1440x900@16bit: id 0x00020003, address 0xb7449000.
[gm] WTware TFTP v.5.0.1.
[gm] tftp: download and unpack file 5.0.1\packages\sc from 192.168.100.245.
[gm] Run scard daemons.
[gm] +--- Executing "/sbin/openct-control init"
[gm] +- Errorlevel: 0, output:
[pfac] Got command line /sbin/rdpdr[scard].
[gm] +------------------------
[pfac] Ok, PID 390.
[gm] Loading ISO 9660 and UDF CDROM filesystem drivers.
[gm] +--- Executing "/sbin/modprobe udf"
[rdpdr-scard] RDP Smart Card Redirector, WTware v.5.0.1.
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe isofs"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading UTF8 charset.
[gm] +--- Executing "/sbin/modprobe nls_cp437"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe nls_utf8"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading VFAT filesystem driver.
[gm] +--- Executing "/sbin/modprobe fat"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe vfat"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe ntfs"
[gm] +- Errorlevel: 0, output:
[KERNEL] NTFS driver 2.1.30 [Flags: R/O MODULE].
[gm] +------------------------
[gm] Loading usb storage driver.
[gm] +--- Executing "/sbin/modprobe scsi_mod"
[gm] +- Errorlevel: 0, output:
[KERNEL] SCSI subsystem initialized
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe usb-storage"
[KERNEL] Initializing USB Mass Storage driver...
[gm] +- Errorlevel: 0, output:
[KERNEL] usbcore: registered new interface driver usb-storage
[KERNEL] USB Mass Storage support registered.
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe sd_mod"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[pfac] Got command line /sbin/resolver 0 dns [fr-ts-farm.house.int].
[pfac] Ok, PID 416.
[gm] fr-ts-farm.house.int => 192.168.77.113.
[pfac] Process pid 416 terminated, status 00000000.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 484352 Kb.
[pfac] Got command line /sbin/rdpclient 1.
[pfac] Ok, PID 417.
[rdpclient 417] RDP Terminal Client, WTware v.5.0.1, pipe 1, pid 417.
[rdpclient 417] Add RDPDR channel.
[rdpclient 417] Add smartcard redirection.
[rdpclient 417] Add WTVC WTware control channel.
[rdpclient 417] Make RDP session with 192.168.77.113:3389.
[rdpclient 417] Username: "maksimkina".
[rdpclient 417] Password: present.
[rdpclient 417] Domain: "house".
[rdpclient 417] No shell.
[rdpclient 417] No directory.
[rdpclient 417] Window: 1440x900@16.
[rdpclient 417] PFlags 0x0000006F.
[rdpclient 417] Keyboard 00000009:00000000.
[rdpclient 417] My hostname "maksimkina".
[rdpclient 417] TCP: connecting to 192.168.77.113:3389.
[rdpclient 417] TCP: connection with 192.168.77.113:3389 established.
[rdpclient 417] Turn keepalive on.
[rdpclient 417] Free ram after buffers allocation: 480996 KB.
[rdpclient 417] RDP5 encryption (X.509).
[rdpclient 417] RC4 key 128 bit.
[rdpclient 417] Server Redirection flags 0x0000000d.
[rdpclient 417] Server 192.168.77.102.
[rdpclient 417] User maksimkina
[rdpclient 417] Domain HOUSE
[rdpclient 417] LOGON_EX_LOGONERRORS
[rdpclient 417] Got PDUTYPE2_SET_ERROR_INFO_PDU with errorInfo 0x00000000.
[rdpclient 417] No additional information is available.
[rdpclient 417] Receive Disconnect Provider Ultimatum.
[gm] TSClient gracefully end.
[rdpclient 417] Caught signal SIGTERM.
[pfac] Process pid 417 terminated, status 00000000.
[pfac] Got command line /sbin/rdpclient 2.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 2): 484352 Kb.
[pfac] Ok, PID 418.
[rdpclient 418] RDP Terminal Client, WTware v.5.0.1, pipe 2, pid 418.
[rdpclient 418] Add RDPDR channel.
[rdpclient 418] Add smartcard redirection.
[rdpclient 418] Add WTVC WTware control channel.
[rdpclient 418] Make RDP session with 192.168.77.102:3389.
[rdpclient 418] Username: "maksimkina".
[rdpclient 418] Password: present.
[rdpclient 418] Domain: "HOUSE".
[rdpclient 418] No shell.
[rdpclient 418] No directory.
[rdpclient 418] Window: 1440x900@16.
[rdpclient 418] PFlags 0x0000006F.
[rdpclient 418] Keyboard 00000009:00000000.
[rdpclient 418] My hostname "maksimkina".
[rdpclient 418] TCP: connecting to 192.168.77.102:3389.
[rdpclient 418] TCP: connection with 192.168.77.102:3389 established.
[rdpclient 418] Turn keepalive on.
[rdpclient 418] Free ram after buffers allocation: 480996 KB.
[rdpclient 418] Empty Balance Info.
[rdpclient 418] RDP5 encryption (X.509).
[rdpclient 418] RC4 key 128 bit.
[rdpclient 418] LOGON_EX_LOGONERRORS
[rdpclient 418] SessionId 0x00000020: HOUSE\maksimkina.
[gm] Allocate 59136 bytes of shared memory for X imgbuf.
[gm] New shared memory block 224x132@16bit: id 0x00028004, address 0xb743a000.
Send WTCU discover to 192.168.100.245.
Send WTCU discover to 192.168.100.245.
Send WTCU discover to 192.168.100.245.
Send WTCU discover to 192.168.100.245.
Send WTCU discover to 192.168.100.245.
Send WTCU discover to 192.168.100.245.
[KERNEL] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0008
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[KERNEL] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
[KERNEL] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
[KERNEL] ehci_hcd 0000:00:0f.5: port 3 high speed
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-3: new high speed USB device number 4 using ehci_hcd
[KERNEL] ehci_hcd 0000:00:0f.5: port 3 high speed
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-3: default language 0x0409
[KERNEL] usb 1-3: udev 4, busnum 1, minor = 3
[KERNEL] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c86
[KERNEL] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] usb 1-3: Product: Android Phone
[KERNEL] usb 1-3: Manufacturer: HTC
[KERNEL] usb 1-3: SerialNumber: HT22GV801911
[KERNEL] usb 1-3: usb_probe_device
[KERNEL] usb 1-3: configuration #1 chosen from 1 choice
[KERNEL] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
[KERNEL] usb-storage 1-3:1.0: usb_probe_interface
[KERNEL] usb-storage 1-3:1.0: usb_probe_interface - got id
[KERNEL] scsi0 : usb-storage 1-3:1.0
[KERNEL] usb 1-3: adding 1-3:1.1 (config #1, interface 1)
[KERNEL] drivers/usb/core/inode.c: creating file '004'
[KERNEL] scsi 0:0:0:0: Direct-Access HTC Android Phone 0000 PQ: 0 ANSI: 2
[KERNEL] sd 0:0:0:0: [sda] Attached SCSI removable disk
[hpsc] Action change.
[hpsc] R/w FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
[hpsc] R/o NTFS mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
[hpsc] R/o FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
Send WTCU discover to 192.168.100.245.
Send WTCU discover to 192.168.100.245.
[KERNEL] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0008
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:3 status 001002 0 ACK POWER sig=se0 CSC
[KERNEL] hub 1-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
[KERNEL] usb 1-3: USB disconnect, device number 4
[KERNEL] usb 1-3: unregistering device
[KERNEL] usb 1-3: unregistering interface 1-3:1.0
[KERNEL] usb 1-3: unregistering interface 1-3:1.1
[KERNEL] usb 1-3: usb_disable_device nuking all URBs
[KERNEL] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
[KERNEL] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0008
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[KERNEL] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
[KERNEL] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
[KERNEL] ehci_hcd 0000:00:0f.5: port 3 high speed
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-3: new high speed USB device number 5 using ehci_hcd
[KERNEL] ehci_hcd 0000:00:0f.5: port 3 high speed
[KERNEL] ehci_hcd 0000:00:0f.5: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-3: default language 0x0409
[KERNEL] usb 1-3: udev 5, busnum 1, minor = 4
[KERNEL] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c86
[KERNEL] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] usb 1-3: Product: Android Phone
[KERNEL] usb 1-3: Manufacturer: HTC
[KERNEL] usb 1-3: SerialNumber: HT22GV801911
[KERNEL] usb 1-3: usb_probe_device
[KERNEL] usb 1-3: configuration #1 chosen from 1 choice
[KERNEL] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
[KERNEL] usb-storage 1-3:1.0: usb_probe_interface
[KERNEL] usb-storage 1-3:1.0: usb_probe_interface - got id
[KERNEL] scsi1 : usb-storage 1-3:1.0
[KERNEL] usb 1-3: adding 1-3:1.1 (config #1, interface 1)
[KERNEL] drivers/usb/core/inode.c: creating file '005'
[KERNEL] scsi 1:0:0:0: Direct-Access HTC Android Phone 0000 PQ: 0 ANSI: 2
[KERNEL] sd 1:0:0:0: [sda] Attached SCSI removable disk
[hpsc] R/w FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
[hpsc] Action change.
[hpsc] R/o NTFS mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
[hpsc] R/o FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
[rdpclient 418] Remote control started.

--------------------------------------------------------------------------------
Home   WTware diskless client. 